A ground support equipment tracker is a small device attached to non-motorized ramp equipment. Think baggage dollies, container carts, and other GSE that does not have its own engine or fuel log. Its job is simple. It reports where that equipment is, without needing a person to look for it, scan it, or write it down.

Motorized GSE already gets a lot of attention. Tugs and tractors have engines, fuel logs, and maintenance schedules. Someone is usually keeping an eye on them. Non-motorized equipment does not get the same treatment. It moves constantly between clusters and shifts. Once it moves, teams often lose track of exactly where it ended up.

This is not a small operational annoyance. Across a busy shift, the minutes spent looking for equipment add up quickly, and they tend to land at the worst possible moments, right when a turnaround is already tight.

Why Dollies and Carts Go Missing More Than Motorized GSE

The pattern is familiar to anyone who has worked ground operations. A supervisor walks the apron looking for a dolly that should be nearby. Or the equipment is only noticed as missing the moment it is needed for a departure. Sometimes it has simply been left in the wrong cluster. Sometimes another handler has picked it up and moved it along. Sometimes it is genuinely lost.

Based on patterns we and our partner proveo have observed at customer sites, this shows up again and again. The shape of the problem stays roughly the same, no matter the airport size or region. Equipment moves faster than anyone can log it by hand.

[IMAGE PLACEHOLDER: A ground handler searching for equipment on an airport apron] Alt text options:

1. Ground handler searching for a missing baggage dolly on an airport ramp
2. Airport ground crew looking for ground support equipment between aircraft
3. Ramp supervisor walking the apron to locate a misplaced cart

Most airports still rely on some mix of barcodes, logbooks, and radio calls. Each method runs into its own limit once equipment volume and ramp activity pick up.

Barcodes and Line of Sight Problems

Barcode scanning needs a clear line of sight. It also needs someone willing to stop and scan. That is difficult to count on when a dolly is parked behind several others. It is even harder when equipment is being towed across the apron mid-shift. In practice, scanning happens inconsistently. That leaves gaps in the record almost as soon as it is created. Over a full shift, those small gaps add up into a record nobody fully trusts.

Logbooks That Go Stale Fast

Paper logs and spreadsheets fall out of date fast. Equipment moves faster than a written record can keep up with. By the time an entry gets logged, the equipment has often already moved again. The log becomes a record of where something used to be. It stops being a record of where something is now.

Why Traditional RFID Falls Short

RFID sounds like an obvious fix. It has a real limitation worth understanding, though. Typical read range is only a few feet. Covering a busy apron with that kind of range takes a large number of readers. Even then, gaps between reader zones are common. A dolly parked just outside a reader's range is still, in effect, invisible.

None of these methods are wrong exactly. They are simply built for a smaller, slower version of ground operations than what actually happens on a working ramp.

[IMAGE PLACEHOLDER: Close up of a barcode scanner failing to read a dolly tag] Alt text options:

1. Barcode scanner struggling to read a tag on airport ground equipment
2. Ground handler attempting to scan a dolly barcode on a busy apron
3. Faded barcode label on a baggage cart at an airport

It is tempting to assume this is already solved somewhere else. It is worth understanding why it usually is not.

Strict Environmental and Regulatory Standards

Airport ground operations run under demanding environmental and regulatory rules. Any device placed on ramp equipment has to hold up to daily exposure to rain, dust, and fuel residue. It also has to survive repeated impact from loading and towing. That rules out a lot of general purpose tracking hardware before it is even tested on site. A tracker built for a warehouse shelf simply was not designed for this kind of daily punishment.

A Market Built for Motorized Equipment

Much of the ground support equipment tracking market has focused on motorized GSE. Driver behaviour monitoring and vehicle condition systems are fairly well established for tugs and tractors. Non-motorized equipment has largely been left behind. These are the dollies and carts that tend to go missing the most, and they are the equipment the market has paid the least attention to. The tools exist for the assets that already had some visibility. The gap sits everywhere else, quietly, shift after shift.

Not every tracker is designed for this environment. The specification sheet matters more here than it does for most other asset tracking use cases.

Durability Requirements That Matter

A ground support equipment tracker for airport use should be rated to handle pressure washing, dust, and physical impact. It should do this without a bulky, specialized enclosure bolted on as an afterthought. As one reference point, the Alps Alpine Asset Tracking Hati line is rated IP69 and IK09. It is built to handle daily exposure on a working ramp. Some variants are suited to hazardous or in-flight environments where that level of certification is required. That is the kind of durability this use case calls for. It is not something adapted from a warehouse or retail setting after the fact.

Coverage Across the Apron

Battery life and connectivity matter just as much as the housing. A tracker that needs frequent recharging will struggle here. So will one that only communicates over a short range. Look for hardware built for multi-year battery life. Look for connectivity that covers the full apron, not just a single gate or hangar. A tracker is only useful if it keeps reporting long after the pilot phase ends.

[IMAGE PLACEHOLDER: A rugged tracker mounted on an airport dolly] Alt text options:

1. Rugged asset tracker mounted on a non-motorized ground support dolly
2. Ground support equipment tracker attached to an airport baggage cart
3. Weatherproof GPS tracker installed on airport ramp equipment

Once ground support equipment reports its own location, the workflow around it changes. A supervisor no longer needs to walk the ramp. They do not need to wait on a radio call to confirm where a dolly is. They check a dashboard instead. It shows near-real-time equipment locations across the apron, updated as the equipment moves.

That shift matters most in the moments that used to cause the biggest delays. Right before a departure. During a shift change. When equipment needs to be reassigned between clusters quickly. Instead of a search, it becomes a simple lookup. The time that used to go toward finding equipment goes back toward actually handling it.

This does not remove the need for good process. It removes the guesswork underneath that process. Supervisors can plan around where equipment actually is, rather than where it was last seen.

It also changes how shift handovers work. An outgoing supervisor can point to a dashboard instead of walking an incoming one around the apron. That handover takes minutes instead of an hour, and it leaves less room for equipment to quietly slip through the gap between shifts.

We are still early in proving this out with airport ground operations customers. So we are not going to lead with a specific return on investment figure we cannot yet back up. What we can say with confidence is that the underlying problem is well documented across the industry. Our own reporting on the cost of missing ground support equipment covers some of that industry data in more depth.

It is also a problem we have seen firsthand at customer sites, again and again, in close to the same shape. Equipment moves. Nobody tracks where. Someone eventually has to go find it the manual way.

Our Düsseldorf Airport deployment is an early example of this approach being put into practice at scale. We expect to have more results to share as the deployment matures.

[IMAGE PLACEHOLDER: Dashboard showing live locations of airport ground equipment] Alt text options:

1. Dashboard displaying near-real-time locations of ground support equipment
2. Airport operations dashboard tracking dollies and carts across the apron
3. Software interface showing GSE tracker locations on an airport map

Solving this does not require reinventing ground operations. It requires giving equipment that has mostly been invisible on paper a way to show up on a screen instead.

A practical starting point looks like this:

• Identify the non-motorized equipment types causing the most search time or loss, usually dollies and carts first
• Choose tracking hardware rated for the environmental conditions of your specific ramp, not a general purpose device
• Pilot on a limited cluster before expanding coverage across the full apron
• Review results after a full operating cycle, not just a single week, since equipment patterns shift with schedules and staffing